Hardware - CCS
Printers
CCS supports all HP and LexMark laser printers. In the following table a selection of recommended printers are provided for comparison. For advice regarding printer selection contact the Hardware Advice Line at ext. 4544.
Please note that only Lexmark and HP printers, that are using PCL as the printer language, are supported for OGF printing. Printers that DO NOT SUPPORT OGF printing.
If the majority of your printing will not be colour, then it is highly recommended that a monochrome laser printer also be purchased. This will save money as the cost of colour printing is higher per page, as are the replacement parts.
Also note the use of 3rd party or refilled toners with these printers is not recommended. Any problem caused by their use is not covered by the Manufacturer’s warranty and the customer will be charged for the replacement parts. Visit the Lexmark or HP site for information on how to make sure the toner you are buying is Genuine Lexmark or HP.
If you decide to continue using 3rd party or refilled toners in your printer. CCS will charge $75.00 per hour to clean the printer caused by toner spilling into it. This charge will be added to any costs for replacement parts.
Click printer name for full specification and price (my.ryerson username/password required).
|
Colour
Printing |
Print Speed (Pages/Min) |
Duplexer
|
Toner (Page Yield) |
Colour |
Fax
|
|
|---|---|---|---|---|---|---|
| Hewlett Packard: | ||||||
| P1606dn | 25 |
Yes
|
2,100 |
No
|
No
|
|
| P2055dn | 33 |
Yes
|
2,300 |
No
|
No
|
|
| M602x | 50 |
Yes
|
24,000 |
No
|
No
|
|
| M4555f MFP | 52 |
Yes
|
24,000 |
Yes
|
Yes
|
|
| M551dn |
Yes
|
33 |
No
|
5,500 Black 6,000 Colour |
No
|
No
|
| Lexmark: | ||||||
| E260dn | 35 |
Yes
|
1,000 |
No
|
No
|
|
| E360dn | 40 |
Yes
|
2,300 |
No
|
No
|
|
| T652dtn | 50 |
Yes
|
10,000 |
No
|
No
|
|
| X656de MFP | 55 |
Yes
|
18,000 |
Yes
|
Yes
|
|
| C734dtn |
Yes
|
30 |
Yes
|
8,000 Black 6,000 Colour |
No
|
No
|
Complete Hardware Price List for Ryerson faculty and staff![]()
(my.ryerson username and password required).







