Marcel Leon De Paz, B. A. Jubran, “Numerical Modeling of Multi Micro Jet Impingement Cooling of a Three Dimensional

Fadéla Nemdili, Abbès Azzi, and Bassam Ali Jubran, “Numerical investigation of the influence of a hole imperfection on film cooling effectiveness”, International Journal of Numerical Methods for Heat & Fluid Flow, Volume 21, Number 1, 2011.

Mustapha Benabed, Abbès  Azzi and B. A. Jubran, “Numerical investigation of the influence of incidence angle on asymmetrical turbine blade model showerhead film cooling effectiveness",J. Heat and Mass Transfer, Volume 46, Number 9 / October 2010.

Sima Baheri Islami, S. P. Alavi Tabrizi,  Bassam A. Jubran,  Esmaeil Esmaeilzadeh, “Influence of Trenched Shaped Holes on Turbine Blade Leading Edge Film Cooling”, J. Heat Transfer Engineering, 31: 10, 889 — 906, 2010.

Marc Ely, and B. A. Jubran, “A Numerical Study on Improving Large Angle Film Cooling Performance Through the Use of Sister Holes,”  J. Numerical Heat Transfer, Part A: Applications, 55: 634–653, 2009.

Marc Ely, B. A. Jubran, “A Numerical Evaluation on the Effect of Sister Holes on Film Cooling Effectiveness and the Surrounding Flow Field,” J. Heat and Mass Transfer, Volume 45, No. 11, pp. 1432-1181, 2009.

S. Baheri, S. P. Alavi Tabrizi, and B. A. Jubran, “Computational Investigation of Film Cooling from Trenched Holes Near the Leading Edge of a Turbine Blade,” J. Numerical Heat Transfer, Part A: Applications, 53:  issue 3, pp 208-322, 2008.

E. Galvis, B. A. Jubran., F. Xi., K. Behdinan, and Z.  Fawaz, “Numerical Modeling of Pin-Fin Micro Heat Exchangers,” J. Heat and Mass Transfer, Volume 44, No. 6, pp. 659-666, 2008.

James Lambie, Fengfeng (Jeff) Xi, Bo Tan, and B. A. Jubran, “An Overview on Micro-Meso Manufacturing Techniques for Micro-Heat Exchangers for Turbine Blade Cooling," Int. J. Manufacturing Research, Vol. 3, No. 1, 2008.

S. Baheri, S. P. Alavi Tabrizi, and B. A. Jubran, "Film Cooling Effectiveness from Trenched Shaped and Compound Holes", J. Heat and Mass Transfer, Volume 44, No. 8, pp. 989-998, 2008.

Fadéla Nemdili, Abbès Azzi, Georgios Theodoridis and B A Jubran, “Reynolds Stress Transport Modeling of Film Cooling at the Leading Edge of a Symmetrical Turbine Blade Model,”  J. Heat Transfer Engineering, 29(11):950-960, 2008.

Y.H., Zurigat, and B. A, Jubran, and L., Khezzar, “A Surge Analysis of Multi-Phase Flow in a Gathering Manifold,” J. Petroleum Science and Technology, Vol. 26, No. 15., pp. 1741-1756, 2008.

Abbès Azzi and Bassam A. Jubran, "Numerical Modelling of Film Cooling from Converging Slot-Hole"  J. Heat and Mass Transfer, Vol. 43, Number 4 / February, 2007.

B. A. Jubran, Y. H. Zurigat, M. S. Al-Shukri, and H. H. Al-Busaidi, “The Use of Drag Reduction Agent and a Detergent for Drag Reduction in Circulatory Vertical Pipe Flow," J. Polymer-Plastics Technology and Engineering, 45: 4, 2006.

Marc Ely, B. A. Jubran, “Film Cooling from Short Holes with Sister Hole Influence” ASME Paper # GT2012-68081, Proceedings of ASME Turbo Expo 2012: Gas Turbine Technical Conference & Exposition, June 11-15, 2012, Copenhagen, Denmark.

Karan Anand and Bassam A. Jubran, “Computational study of micro-jet impingement heat transfer in a high pressure turbine vane,” ASME Paper # GT2011-45267,Proceedings of  ASME Turbo Expos 2011 Conference, June 6-10, 2011, Vancouver, Canada.

Marc Ely, B. A. Jubran, “A Parametric Study on the Effect of Sister Hole Location on Active Film Cooling Flow Control” ASME Paper # GT2010-22060, Proceedings of  ASME Turbo Expos 2010 Conference, June 14-18, 2010, Glasgow, UK.

Marcel Leon De Paz, B. A. Jubran, “A Numerical Study of an Impingement Array inside a Three Dimensional Turbine Vane” ASME Paper # GT2010-22270, Proceedings of  ASME Turbo Expos 2010 Conference, June 14-18, 2010, Glasgow, UK.

Karan Anand and Bassam A. Jubran, “Study of Single, Axisymmetric Micro Jet-Impingement Cooling,” 18th Annual Conference of the CFD Society of Canada, London, Canada, May 17-19, 2010.

Abbes Azzi, Nemdili Fadéla, Bassam Ali Jubran,  “Influence of Defects of  Injection Holes on the Effectiveness of Film Cooling”, paper No. 817, CFM’09, 19^th French Congress of Mechanics, Aug. 24-28, 2009. Marseilles, France

Mustapha Benabed, Abbès Azzi, B. A Jubran, “A Comparative Study of the Film Cooling Hole Configuration Effects on the Leading Edge of Asymmetrical Turbine Blade”, Int. Symp. on Heat Transfer in Gas Turbine Systems, 9-14 August 2009, Antalya, Turkey.

Marcel Leon De Paz, B. A. Jubran “Predictions of Thermal and Hydrodynamic Characteristics of a Single Circular Micro-Jet Impinging on a Flat Plate,”  ASME Paper # GT2008-50490, Proceedings of  ASME Turbo Expos 2008 Conference, June 9-13, 2008, Berlin, Germany.

Marc Ely, B. A. Jubran “A Numerical Study on Increasing Film Cooling Effectiveness Through the Use of Sister Holes,” ASME Paper # GT2008-50366, Proceedings of  ASME Turbo Expos 2008 Conference, June 9-13, 2008, Berlin, Germany.

Sima Baheri, B A . Jubran, S. P. Alavi Tabrizi “The Effect of Turbulence Intensity on Film Cooling of Gas Turbine Blade from Trenched Shaped Holes,” ASME Paper # GT2008-50318, Proceedings of  ASME Turbo Expos 2008 Conference, June 9-13, 2008, Berlin, Germany.

Nemdili, F., Azzi, A., Jubran, B. A., ”Shower Head Film Cooling Effectiveness of a Symmetrical Turbine Blade Model - Effect of Lateral Injection,” Proceedings of HT2007 2007, Paper # HT2007-32081, ASME-JSME Thermal Engineering Summer Heat Transfer Conference, July 8-12, 2007, Vancouver, British Columbia, CANADA

Azzi, A., Nemdili, F., Jubran, B. A.,”Turbulent Flow Field of a Streamwise Film Cooling Injection for a Symmetrical Turbine Blade Mode,“ Proceedings of the 15^th Annual Conference of the CFD Society of Canada, CFD 2007, Toronto, Ontario, Canada, May 27-31, 2007.

Azzi, A., Khorsi, A., Jubran B. A.,"Computation of film cooling from a new geometrical converging slot holes," 7th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 5-9 MARCH 2007, Athens Greece.

Baheri, S.,  S. P. Alavi Tabrizi, S. P., and Jubran, B A.,"Investigation of Film Cooling Effectiveness by Shaped Holes within Transverse Slot,"" 7th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 5-9 MARCH 2007, Athens, Greece.

E. Galvis, B. A. Jubran, J. Xi, K. Behdinan, and Z. Fawaz, “Comparative Study of Turbulence Models in Predicting the Thermal and Hydrodynamic Characteristics of a Micro Heat Exchanger,” 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, San Francisco, Paper # AIAA-2006-3806, June 5 – 8, 2006.