You are now in the main content area

ResNet Instructions for Windows 7

Connecting the Modem

Connect the modem as shown in the diagram above. 

Cable 1 (LINE) – Ensure BOTH ENDS are connected, as above – cable is provided by ResNet 

Cable 2 (LAN) Ethernet Cable – Ensure BOTH ENDS are connected, as – cable provided by student 

Cable 3 (POWER) – Ensure BOTH are connected, as above – cable is provide by ResNet 

Click Start > Control Panel. Double Click Network and Sharing Center.

Click Change Adapter Settings

Network Sharing Center Window. In the left menu, "Change Adapter Settings" is highlighted.

Right Click Local Area Connection – if it shows Enable – Click Enable.

Note: If it shows Disable - Click Disable then right click Local Area Connection again, click Enable

Double Click Local Area Connections. From the Local Area Connection Status screen, double click Properties.

Place a check mark in the box beside Internet Protocol Version 4 (TCP/IPv4). Double Click Internet Protocol Version 4 (TCP/IPv4). 

Place a check marks beside: 

(a)    Obtain an IP address automatically 
(b)    Obtain DNS server address automatically

Click OK and close all screens.