Biography

 

Publications

A. Refereed journal papers
  1. W.F.Xu, J.H.Liu, D.L.Chen, G.H.Luan, J.S.Yao, Change of microstructure and cyclic deformation behavior along the thickness in a friction-stir-welded aluminum alloy, Scripta Materialia, 2012, 66(1), 5-8.
  2. W.Xu, D.L.Chen, L.Liu, H.Mori and Y.Zhou, Microstructure and mechanical properties of weld-bonded and resistance spot welded magnesium-to-steel dissimilar joints, Materials Science and Engineering A, 2012, 537(1), 11-24.
  3. N.Farabi, D.L.Chen and Y.Zhou, Tensile properties and work hardening behavior of laser welded dual-phase steel joints, Journal of Materials Engineering and Performance, 2012, 21(2), 222-230.
  4. X.J.Zhao, N.Zhang, H.Q.Ru, B.Liang and D.L.Chen, Mechanical properties and toughening mechanisms of silicon carbide nano-particulate reinforced Alon composites, Materials Science and Engineering A, 2012, 538, 118-124.
  5. X.J.Zhao, H.Q.Ru, D.L.Chen, N.Zhang and B.Liang, Thermal shock behavior of nano-sized SiC particulate reinforced AlON composites, Materials Science and Engineering B, 2012, 177(5), 402-410.
  6. V.K.Patel, S.D.Bhole and D.L.Chen, Microstructure and mechanical properties of dissimilar welded Mg-Al joints by ultrasonic spot welding technique, Science and Technology of Welding and Joining, 2012, 17(3), 202-206.
  7. H.A.Patel, N.Rashidi, D.L.Chen, S.D.Bhole and A.A.Luo, Cyclic deformation behavior of a super-vacuum die cast magnesium alloy, Materials Science and Engineering A, 2012, 546, 72-81.
  8. S.H.Chowdhury, D.L.Chen, S.D.Bhole, E.Powidajko, D.C.Weckman and Y.Zhou, Fiber laser welded AZ31 magnesium alloy: Effect of welding speed on microstructure and mechanical properties, Metallurgical and Materials Transactions A, 2012, 43(6), 2133-2147.
  9. W.F.Xu, J.H.Liu, D.L.Chen, G.H.Luan, J.S.Yao, Improvements of strength and ductility in aluminum alloy joints via rapid cooling during friction stir welding, Materials Science and Engineering A, 2012, 548, 89-98.
  10. G.Sidhu, S.D.Bhole, D.L.Chen and E.Essadiqi, Development and experimental validation of a neural network model for prediction and analysis of the strength of bainitic steels, Materials and Design, 2012, 41, 99-107.
  11. V.K.Patel, S.D.Bhole and D.L.Chen, Improving weld strength of magnesium to aluminum dissimilar joints via tin interlayer during ultrasonic spot welding, Science and Technology of Welding and Joining, 2012, 17(5), 342-347.
  12. D.Sarker and D.L.Chen, Detwinning and strain hardening of an extruded magnesium alloy during compression, Scripta Materialia, 2012, accepted.
  13. F.A.Mirza and D.L.Chen, An analytical model for predicting the yield strength of particulate-reinforced metal matrix nanocomposites with consideration of porosity, Nanoscience and Nanotechnology Letters, 2012, accepted.
  14. G.Sidhu, S.D.Bhole, D.L.Chen and E.Essadiqi, An improved model for bainite formation at isothermal temperatures, Scripta Materialia, 2011, 64(1), 73-76.
  15. N.Farabi, D.L.Chen and Y.Zhou, Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints, Journal of Alloys and Compounds, 2011, 509(3), 982-989.
  16. X.J.Zhao, D.L.Chen, H.Q.Ru and N.Zhang, Zirconium nitride nano-particulate reinforced Alon composites: fabrication, mechanical properties and toughening mechanisms, Journal of the European Ceramic Society, 2011, 31(5), 883-892.
  17. Q.Chang, H.Q.Ru, D.L.Chen, Microstructure in pressureless-sintered iron-containing hydroxyapatite/titanium composites, Advanced Materials Research, 2011, Vols.160-162, 1582-1587.
  18. S.M.Chowdhury, D.L.Chen, S.D.Bhole, E.Powidajko, D.C.Weckman and Y.Zhou, Microstructure and mechanical properties of fiber and diode laser welded AZ31 magnesium alloy, Metallurgical and Materials Transactions A, 2011, 42(7), 1974-1989.
  19. Q.Chang, D.L.Chen, H.Q.Ru, X.Y.Yue, L.Yu and C.P.Zhang, Three-dimensional fractal analysis of fracture surfaces in titanium-iron particulate reinforced hydroxyapatite composites: Relationship between fracture toughness and fractal dimension, Journal of Materials Science, 2011, 46(18), 6118-6123.
  20. W.F.Xu, J.H.Liu, D.L.Chen, Material flow and core/multi-shell structures in a friction stir welded aluminum alloy with embedded copper markers, Journal of Alloys and Compounds, 2011, 509(33), 8449-8454.
  21. X.J.Zhao, D.L.Chen, H.Q.Ru, N.Zhang and B.Liang, Oxidation behaviour of nano-sized SiC particulate reinforced Alon composites, Journal of the European Ceramic Society, 2011, 31(13), 2255-2265.
  22. G.Sidhu, S.D.Bhole, D.L.Chen and E.Essadiqi, Reply to comments on “An improved model for bainite formation at isothermal temperatures”, Scripta Materialia, 2011, 65(4), 373-375.
  23. Q.Chang, H.Q.Ru, D.L.Chen, X.Y.Yue, L.Yu and C.P.Zhang, An in-vitro investigation of iron-containing hydroxyapatite/titanium composites, Journal of Materials Science & Technology, 2011, 27(6), 546-552.
  24. G.Sidhu, S.D.Bhole, D.L.Chen and E.Essadiqi, Determination of volume fraction of bainite in low carbon steels using artificial neural networks, Computational Materials Science, 2011, 50(12), 3377-3384.
  25. H.A.Elhadari, H.A.Patel, D.L.Chen and W.Kasprzak, Tensile and fatigue properties of a cast aluminum alloy with Ti, Zr and V additions, Materials Science and Engineering A, 2011, 528(28), 8128-8138.
  26. W.F.Xu, J.H.Liu, D.L.Chen, G.H.Luan, J.S.Yao, Tensile properties and strain hardening behavior of a friction stir welded AA2219 Al alloy, Advanced Materials Research, 2011, 291-294, 833-840.
  27. V.K.Patel, S.D.Bhole and D.L.Chen, Influence of ultrasonic spot welding on microstructure in a magnesium alloy, Scripta Materialia, 2011, 65(10) 911-914.
  28. L.Xiao, L.Liu, D.L.Chen, S. Esmaeili, Y.Zhou, Resistance spot weld fatigue behavior and dislocation substructures in two different heats of AZ31 magnesium alloy, Materials Science and Engineering A, 2011, 529, 81-87.
  29. S.D.Bhole, C.Ma, M.S.Khan, D.L.Chen, A study of spot welding of advanced high strength steels for automotive applications, Journal of Iron and Steel Research International, 2011, 18, Supplement 1, Part 2, 724-729.
  30. X.J.Gu, C.Li, A.H.Feng and D.L.Chen, Application of flat-clad optical fiber Bragg grating sensor in characterization of asymmetric fatigue deformation of extruded magnesium alloy, IEEE Sensors Journal, 2011, 11(11), 3042-3046.
  31. Q.Chang, D.L.Chen, H.Q.Ru, X.Y.Yue, L.Yu and C.P.Zhang, Toughening mechanisms in iron-containing hydroxyapatite/titanium composites, Biomaterials, 2010, 31(7), 1493-1501.
  32. Q.Chang, H.Q.Ru, D.L.Chen, X.Y.Yue, W.Wang, Fabrication and properties of novel HA/Ti-Fe biocomposites, Journal of Materials Engineering, 2010, Suppl. No.2, 341-344. 
  33. N.Farabi, D.L.Chen, J.Li, Y.Zhou and S.J.Dong, Microstructure and mechanical properties of laser welded DP600 steel joints, Materials Science and Engineering A, 2010, A527(4-5), 1215-1222.
  34. S.M.Chowdhury, D.L.Chen, S.D.Bhole, X.Cao, E.Powidajko, D.C.Weckman and Y.Zhou, Tensile properties and strain hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy, Materials Science and Engineering A, 2010, 527(12), 2951-2961.
  35. A.H.Feng, D.L.Chen and Z.Y.Ma, Microstructure and cyclic deformation behavior of a friction stir welded 7075 Al alloy, Metallurgical and Materials Transactions A, 2010, 41(4), 957-971.
  36. C.Li, A.H.Feng, X.J.Gu and D.L.Chen, Localized cyclic strain measurements of friction stir welded aluminum alloy using a flat-clad optical fiber sensor array, IEEE Sensors Journal, 2010, 10(4), 888-892.
  37. H.A.Patel, D.L.Chen, S.D.Bhole and K.Sadayappan, Microstructure and tensile properties of thixomolded magnesium alloys, Journal of Alloys and Compounds, 2010, 496(1-2), 140-148.
  38. S.M.Chowdhury, D.L.Chen, S.D.Bhole and X.Cao, Tensile properties of a friction stir welded magnesium alloy: effect of pin tool thread orientation and weld pitch, Materials Science and Engineering A, 2010, 527(21-22), 6064-6075.
  39. A.H.Feng, D.L.Chen, C.Li and X.J.Gu, Flat-cladding fiber Bragg grating sensors for large strain amplitude fatigue tests, Sensors, 2010, 10(8), 7674-7680.
  40. A.H.Feng, D.L.Chen and Z.Y.Ma, Microstructure and low cycle fatigue of a friction stir welded 6061 aluminum alloy, Metallurgical and Materials Transactions A, 2010, 41A(10), 2626-2641.
  41. H.A.Patel, D.L.Chen, S.D.Bhole and K.Sadayappan, Cyclic deformation and twinning in a semi-solid processed AZ91D magnesium alloy, Materials Science & Engineering A, 2010, 528(1), 208-219.
  42. S.Begum, D.L.Chen, S.Xu and A.A.Luo, Low cycle fatigue properties of an extruded AZ31 magnesium alloy, International Journal of Fatigue, 2009, 31(4), 726-735.
  43. B.D.Venkatesh, D.L.Chen and S.D.Bhole, Effect of heat treatment on mechanical properties of Ti-6Al-4V ELI alloy, Materials Science and Engineering A, 2009, 506, 117-124.
  44. C.Liu, D.L.Chen, S.Bhole, X.Cao and M.Jahazi, Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy, Materials Characterization, 2009, 60(5), 370-376.
  45. A.H.Feng, D.L.Chen and Z.Y.Ma, Effect of welding parameters on microstructure and tensile properties of friction stir welded 6061 Al joints, Materials Science Forum, 2009, 618-619, 41-44.
  46. S.Begum, D.L.Chen, S.Xu and A.A.Luo, Erratum: Strain-controlled low-cycle fatigue properties of a newly developed extruded magnesium alloy, Metallurgical and Materials Transactions A, 2009, 40A, No.1, p.255.
  47. A.R.Emami, S.Begum, D.L.Chen, T.Skszek, X.P.Niu, Y.Zhang and F.Gabbianelli, Cyclic deformation behavior of a cast aluminum alloy, Materials Science and Engineering A, 2009, A516(1-2), 31-41.
  48. S.Begum, D.L.Chen, S.Xu and A.A.Luo, Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy, Materials Science and Engineering A, 2009, A517(1-2), 334-343.
  49. C.L.Fan, D.L.Chen and A.A.Luo, Dependence of the distribution of deformation twins on strain amplitudes in an extruded magnesium alloy after cyclic deformation, Materials Science and Engineering A, 2009, A519(1-2) 38-45.
  50. M.S.Khan, S.D.Bhole, D.L.Chen, G.Boudreau, E.Biro and J.Van Deventer, Resistance spot welding characteristics and mechanical properties of galvannealed HSLA 350 steel, Canadian Metallurgical Quarterly,  2009, 48(3), 303-310.
  51. M.S.Khan, S.D.Bhole, D.L.Chen, G.Boudreau, E.Biro and J.Van Deventer, Welding behavior, microstructure and mechanical properties of dissimilar resistance spot welds between galvannealed HSLA350 and DP600 steels, Science and Technology of Welding and Joining, 2009, 14(7), 616-625.
  52. S.Begum, D.L.Chen, S.Xu and A.A.Luo, Strain-controlled low cycle fatigue properties of a newly developed extruded magnesium alloy, Metallurgical and Materials Transactions A, 2008, 39A, 3014-3026.
  53. B.Venkatesh, D.L.Chen and S.D.Bhole, Three-dimensional fractal analysis of fracture surfaces in a titanium alloy for biomedical applications, Scripta Materialia, 2008, 59(4), 391-394.
  54. W.He, S.D.Bhole and D.L.Chen, Modeling the dependence of strength on grain sizes in nanocrystalline materials, Science and Technology of Advanced Materials, 2008, 9(1), 015003.
  55. Z.Zhang and D.L.Chen, Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites, Materials Science and Engineering A, 2008, 483-484, 148-152.
  56. X.Z.Lin and D.L.Chen, Strain controlled cyclic deformation behavior of an extruded magnesium alloy, Materials Science and Engineering A, 2008, 496(1-2), 106-113.
  57. L.Xiao, D.L.Chen and M.C.Chaturvedi, Cyclic deformation mechanisms of precipitation-hardened Inconel 718 superalloy, Materials Science and Engineering A, 2008, 483-484, 369-372.
  58. N.Afrin, D.L.Chen, X.Cao and M.Jahazi, Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy, Materials Science and Engineering A, 2008, 472(1-2), 179-186.
  59. C.Ma, D.L.Chen, S.D.Bhole, G.Boudreau, A.Lee and E.Biro, Microstructure and fracture characteristics of spot-welded DP600 steel, Materials Science and Engineering A, 2008, 485, 334-346.
  60. X.Z.Lin and D.L.Chen, Strain hardening and strain-rate sensitivity of an extruded magnesium alloy, Journal of Materials Engineering and Performance, 2008, 17(6), 894-901.
  61. Z.Zhang and D.L.Chen, Prediction of fracture strength in Al2O3/SiC ceramic matrix nanocomposites, Science and Technology of Advanced Materials, 2007, 8, 5-10.
  62. N.Afrin, D.L.Chen, X.Cao and M.Jahazi, Strain hardening behavior of a friction stir welded magnesium alloy, Scripta Materialia, 2007, 57(11), 1004-1007.
  63. M.Fairman, N.Afrin, D.L.Chen, X.J.Cao and M. Jahazi, Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy, Canadian Metallurgical Quarterly, 2007, 46(4), 425-432.
  64. Z.Zhang and D.L.Chen, Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength, Scripta Materialia, 2006, 54(7), 1321-1326.
  65. C.Ma, S.D.Bhole, D.L.Chen, A.Lee, E.Biro and G.Boudreau, Expulsion monitoring in the spot welded auto steels, Science and Technology of Welding and Joining, 2006, 11(4), 480-487.
  66. D.Anand, D.L.Chen, S.D.Bhole, P.Andreychuk and G.Boudreau, Fatigue behavior of tailor (laser) welded blanks for automotive applications, Materials Science and Engineering A, 2006, 420(1-2), 199-207.
  67. L.Xiao, D.L.Chen and M.C.Chaturvedi, Effect of boron on fatigue crack growth behavior in superalloy IN 718 at RT and 650°C, Materials Science and Engineering A, 2006, 428 (1-2), 1-11.
  68. D.Anand, G.Boudreau, P.Andreychuk, D.L.Chen and S.D.Bhole, Forming behavior of tailor (laser) welded blanks of automotive steel sheet, Canadian Metallurgical Quarterly, 2006, 45(2), 189-198.
  69. M.C. Chaturvedi and D.L. Chen, Microstructural characterization and fatigue properties of 2195 Al-Li alloy, Materials Science Forum, 2006, Vols. 519-521, pp.147-152.
  70. M.Okayasu, D.L.Chen and Z.Wang, Experimental study of the effect of loading condition on fracture surface contact features and crack closure behavior in a carbon steel, Engineering Fracture Mechanics, 2006, 73, 1117-1132.
  71. L.Xiao, D.L.Chen and M.C.Chaturvedi, Effect of boron and carbon on thermomechanical fatigue of IN 718 superalloy: Part I. Deformation behavior, Materials Science and Engineering A, 2006, A437, 157-171.
  72. L.Xiao, D.L.Chen and M.C.Chaturvedi, Effect of boron and carbon on thermomechanical fatigue of IN 718 superalloy: Part II. Deformation microstructures, Materials Science and Engineering A, 2006, A437, 172-182.
  73. Q.Zhang and D.L.Chen, A model for low cycle fatigue life prediction of discontinuously reinforced MMCs, International Journal of Fatigue, 2005, 27(4), 417-427.
  74. L.Xiao, D.L.Chen and M.C.Chaturvedi, Low cycle fatigue behavior of Inconel 718 superalloy with different concentrations of boron at room temperature, Metallurgical and Materials Transactions A, 2005, 36A(10), 2671-2684.
  75. M.Okayasu, Z.Wang and D.L.Chen, Effect of a hard artificial asperity on the crack closure behavior in an annealed 1015 steel, Engineering Fracture Mechanics, 2005, 72, 2106-2127.
  76. L.Xiao, D.L.Chen and M.C.Chaturvedi, Shearing of gamma double prime precipitates and formation of planar slip bands in Inconel 718 during cyclic deformation, Scripta Materialia, 2005, 52(7), 603-607.
  77. M.Okayasu, Z.Wang and D.L.Chen, Etching technique for revelation of plastic deformation zone in low carbon steel, Materials Science and Technology, 2005, 21(5), pp.530-538.
  78. L.Xiao, D.L.Chen and M.C.Chaturvedi, Effect of boron and carbon on the fracture toughness of IN 718 superalloy at RT and 650°C, Journal of Materials Engineering and Performance, 2005, 14, 528-538.
  79. Q.Zhang and D.L.Chen, A model for predicting the particle size dependence of the low cycle fatigue life in discontinuously reinforced MMCs, Scripta Materialia, 2004, 51(9), 863-867.
  80. L.Xiao, D.L.Chen and M.C.Chaturvedi, Effect of boron on the low cycle fatigue behavior and deformation structure of Inconel 718 at 650°C, Metallurgical and Materials Transactions A, 2004, 35A, 3477-3487.
  81. D.L.Chen and Z.Wang, Derivation of applied stress-crack opening displacement relationships for the evaluation of effective stress intensity factor range, International Journal of Fracture, 2004, 125, 371-386.
  82. M.C.Chaturvedi and D.L.Chen, Effect of specimen orientation and welding on the fracture and fatigue properties of 2195 Al-Li alloy, Materials Science and Engineering A, 2004, 387-389, 465-469.
  83. S.X.Xu and D.L.Chen, Geometric correction factors for center cracked specimens subjected to nonlinear bridging stresses in the shear lag model, Engineering Fracture Mechanics, 2003, 70(6), 823-829.
  84. D.L.Chen and M.C.Chaturvedi, Effects of welding and weld heat-affected zone simulation on the microstructure and mechanical behavior of a 2195 aluminum-lithium alloy, Metallurgical and Materials Transactions A, 2001, 32, 2729-2741.
  85. D.L.Chen and M.C.Chaturvedi, Near-threshold fatigue crack propagation behavior of 2195 Al-Li alloy – prediction of crack growth direction and influence of stress ratio, Metallurgical and Materials Transactions A, 2000, 31, 1531-1541.
  86. M.C.Chaturvedi and D.L.Chen, Influence of weld simulation on the microstructure and fatigue strength of 2195 aluminum-lithium alloy, Materials Science Forum, 2000, Vol.331-337, 1769-1774.
  87. D.L.Chen, M.C.Chaturvedi, N.Goel and N.L.Richards, Fatigue crack propagation behavior of X2095 Al-Li alloy, International Journal of Fatigue, 1999, 21(10) 1079-1086.
  88. D.L.Chen, M.C.Chaturvedi, B.Weiss and R.Stickler, Geometric correction factors determined by force balance method for center cracked specimens XII. Subjected to a non-linear bridging stress in fiber-reinforced composite materials, International Journal of Fracture, 1998, 88, L77-L82.
  89. W.Pichl, D.L.Chen and B.Weiss, Microplastic relaxations of single and polycrystalline molybdenum, Physica Status Solidi (a), 1998, 167(1), 43-60.
  90. Z.F.Zhang, X.W.Li, H.H.Su, D.L.Chen, G.Y.Li and Z.G.Wang, Cyclic deformation behavior and observation of saturation dislocation patterns of copper crystals containing low angle grain boundaries by SEM-ECC technique, Journal of Chinese Electron Microscopy Society, 1998, 17(3), 252-255.
  91. Y.M.Hu, D.L.Chen, H.H.Su and Z.G.Wang, Investigation of dislocation structures in a cyclically deformed iso-axial copper bicrystal by electron channeling contrast technique, Journal of Materials Science Letters, 1998, 17(10), 865-867.
  92. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Brief review and reconsideration of fatigue crack closure effect in materials, Journal of Materials Science and Technology, 1997, 13(1), 1-14.
  93. D.L.Chen, D.Melisova, B.Weiss and R.Stickler, The electron channeling contrast technique applied to the characterization of dislocation structures in the vicinity of a fatigue crack, Fatigue and Fracture of Engineering Materials and  Structures, 1997, 20(11), 1551-1561.
  94. D.L.Chen, B.Weiss and R.Stickler, Cyclic plasticity of recrystallized Mo at low temperatures, Materials Science and Engineering A, 1997, A234-236, 766-769.
  95. B.Gong, Z.Wang, D.L.Chen and Z.G.Wang, Investigation of micro-deformation bands in fatigued [001] Cu single crystals by electron channeling contrast technology, Scripta Materialia, 1997, 37(10), 1605-1610.
  96. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, An improved expression of geometric correction factors for standard center cracked tension specimens, International Journal of Fracture, 1997, 84(4), L49-L52.
  97. Y.M.Hu, D.L.Chen, H.H.Su and Z.G.Wang, Electron channeling contrast technique in scanning electron microscopy applied to observation of dislocation structure, Chinese Journal of Materials Research, 1997, 11(3), 240-244.
  98. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Response to the comments in SIF expressions for center cracked strip loaded by uniformly distributed stress acting on central portion of crack, International Journal of Fracture, 1997, 83, L37-L44.
  99. B.Gong, D.L.Chen, H.H.Su and Z.G.Wang, Direct observation of dislocation structure in deformed materials by SEM - dislocation structure in a fatigued [001] Cu single crystal, Acta Metallurgica Sinica, 1997, 33(6), 561-565.
  100. D.L.Chen, B.Weiss and R.Stickler, A model for crack closure, Engineering Fracture Mechanics, 1996, 53(4), 493-509.
  101. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Geometric correction factors determined by force balance method for center cracked specimens XI. Subjected to linearly distributed bridging stresses in fiber-reinforced composites, International Journal of Fracture, 1996, 81(3), R63-R69.
  102. D.L.Chen, B.Weiss and R.Stickler, Contribution of the cyclic loading portion below the opening load to fatigue crack growth, Materials Science and Engineering A, 1996, 208(2), 181-187.
  103. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Geometric correction factors determined by force balance method for center cracked specimens X. Loaded by linearly distributed stresses with the maximum occurring at the crack tip, International Journal of Fracture, 1996, 78(1), R3-R8.
  104. C.H.Liu, J.Y.He, D.L.Chen, B.Weiss and R.Stickler, Numerical evaluation of stress distributions ahead of crack tip for finite-width center cracked specimens V. Loaded by two pairs of symmetric concentrated forces on the crack, International Journal of Fracture, 1996, 79(3), R45-R50.
  105. C.H.Liu, J.Y.Wong, D.L.Chen, B.Weiss and R.Stickler, Numerical evaluation of stress distributions ahead of crack tip for finite-width center cracked specimens IV. Loaded by a pair of splitting forces acting at an arbitrary location on the crack, International Journal of Fracture, 1996, 76, R3-R9.
  106. C.H.Liu, J.Y.Wong, D.L.Chen, B.Weiss and R.Stickler, Numerical evaluation of stress distributions ahead of crack tip for finite-width center cracked specimens III. Loaded by uniformly distributed stresses on the center portion of crack, International Journal of Fracture, 1996, 75, R3-R8.
  107. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Re-considerations of fatigue crack closure effect, Chinese Journal of Materials Research, 1995, Vol.9 (suppl.), 162-179.
  108. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Geometric correction factors determined by force balance method for center cracked specimens IX. Loaded by a portion of unsymmetric stresses on the crack, International Journal of Fracture, 1995, Vol.73(3), R47-R58.
  109. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Geometric correction factors determined by force balance method for center cracked specimens VIII. Loaded by two parts of uniformly distributed stresses acting on the crack, International Journal of Fracture, 1995, Vol.70, R35-R44.
  110. A.Hadrboletz, D.L.Chen, B.Weiss and R.Stickler, Experimental K-calibration for corner cracks under bending, International Journal of Fatigue, 1995, 17(8), 545-550.
  111. D.L.Chen, B.Weiss and R.Stickler, A new approach for the determination of stress intensity factors for finite width plate, Engineering Fracture Mechanics, 1994, 48(4), 561-571.
  112. C.H.Liu and D.L.Chen, Numerical evaluation of stress distributions ahead of crack tip for finite-width center cracked specimens II. Loaded by a pair of tensile forces on the center line of specimen, International Journal of Fracture, 1994, 66(3), R57-R63.
  113. D.L.Chen, B.Weiss and R.Stickler, The effective fatigue threshold - significance of the loading cycle below the crack opening load, International Journal of Fatigue, 1994, 16, 485-491.
  114. A.Hadrboletz, D.L.Chen, B.Weiss and R.Stickler, Experimental K-calibration for surface flaws under bending for different materials and stress ratios, Engineering Fracture Mechanics, 1994, 49, 473-485.
  115. D.L.Chen, Z.G.Wang, B.Weiss and R.Stickler, Geometric correction factors determined by force balance method for center cracked specimens VII. Loaded by uniformly distributed stresses acting on central portion of crack, International Journal of Fracture, 1994, 68(1), R9-R14.
  116. D.L.Chen, B.Weiss, R.Stickler, M.Witwer, G.Leichtfried and H.Hödl, Fracture toughness of high melting point materials, High Temperature Materials and Processes, 1994, 13(1), 75-85.
  117. D.L.Chen, B.Weiss and R.Stickler, Geometric correction factors determined by force balance method for center cracked specimens. VI. Loaded by a pair of splitting forces acting at an arbitrary location on the crack, International Journal of Fracture, 1993, 64(4), R89-R96.
  118. A.Hadrboletz, D.L.Chen, B.Weiss and R.Stickler, Experimental K-calibration of elliptical surface cracks under bending, Engineering Fracture Mechanics, 1993, 44(3), 437-448.
  119. C.H.Liu, H.A.Mang, D.L.Chen, B.Weiss and R.Stickler, Numerical assessment of stress distribution ahead of the crack tip for finite-width center cracked tension specimen, International Journal of Fracture, 1993, 63(4), R67-R74.
  120. D.L.Chen, B.Weiss and R.Stickler, Geometric correction factors determined by force balance method for center cracked specimens V. Loaded by a pair of tensile forces acting at some distance from the crack, International Journal of Fracture, 1993, 62(4), R71-R79.
  121. D.L.Chen, B.Weiss and R.Stickler, A new geometric correction factor for a finite width center cracked plate loaded by two pairs of splitting forces, International Journal of Fracture, 1993, 61(3), R43-R50.
  122. D.L.Chen, B.Weiss and R.Stickler, Determination of precise geometric correction factor regarding stress intensity by a "force balance method", International Journal of Fracture, 1993, 59(3), R53-R57.
  123. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Influence of stress ratio and loading condition on near-threshold fatigue crack growth behavior, Journal of Materials Science and Technology, 1993, 9(1), 47-52.
  124. B.Zagar, H.Weiss, D.L.Chen, H.Hödl, B.Weiss and R.Stickler, Laserinterferometer zur berührungslosen Messung von Längenänderungen im Nanometer-Bereich, Materialwissenschaft und Werkstofftechnik, 1992, 23, 197-200.
  125. J.Becker, G.Fischer, R.Schäfer, D.L.Chen, B.Weiss and R.Stickler, Festigkeitseigenschaften einer Al-Fe-V-Legierung aus rasch-erstarrtem Metallpulver, Zeitschrift für Metallkunde, 1992, 83, 548-554.
  126. D.L.Chen, B.Weiss and R.Stickler, Effect of stress ratio and loading condition on the fatigue threshold, International Journal of Fatigue, 1992, 14(5), 325-329.
  127. D.L.Chen, B.Weiss and R.Stickler, A geometric correction function for a finite width center cracked plate loaded by a pair of splitting forces, International Journal of Fracture, 1992, 56(2), R19-R22.
  128. D.L.Chen, B.Weiss and R.Stickler, A new geometric factor formula for a center cracked plate tensile specimen of finite width, International Journal of Fracture, 1992, 55, R3-R8.
  129. D.L.Chen, B.Weiss and R.Stickler, A new evaluation procedure for crack closure, International Journal of Fatigue, 1991, 13(4), 327-331.
  130. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, The dependence of near-threshold fatigue crack growth on microstructure and environment in dual-phase steels, Materials Science and Engineering A, 1989, A108, 141-151.
  131. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, An investigation on fatigue crack propagation threshold values, Acta Metallurgica Sinica, 1989.
  132. Z.G.Wang, D.L.Chen, X.X.Jiang and C.H.Shih, A new model of fatigue crack growth threshold, Philosophical Magazine Letters, 1989, 59(6), 309-316.
  133. X.Y.Zhou, D.L.Chen, W.Ke, Q.S.Zang and Z.G.Wang, Fractal characteristics of pitting under cyclic loading, Materials Letters, 1989, 7(12), 473-476.
  134. D.X.Pang, Z.J.Yang, D.L.Chen and M.X.Quan, Effect of polarizable atmospheres on superconductivity of the Y-Ba-Cu-O compounds, Applied Physics A, 1989, 48, 355-357.
  135. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, The fractal analysis of fatigue fractures in dual-phase steels, Materials Science Progress, 1989, 3(2), 115-120.
  136. D.L.Chen, Fractal and its application to materials science, Materials Science and Engineering (China), 1989, 3, 1-7.
  137. D.L.Chen, D.X.Pang, Z.J.Yang, S.Kong, L.T.Wang, K.Yang and G.W.Qiao, The relationship between superconductivity and microstructure through the fractal dimensions in Y-Ba-Cu-O compounds, Journal of Physics C: Solid State Physics, 1988, 21, L271-L276.
  138. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, Fatigue crack growth in an as-rolled dual-phase steel, Steel Research, 1988, 59, 319-322.
  139. Z.G.Wang, D.L.Chen, X.X.Jiang, S.H.Ai and C.H.Shih, Relationship between fractal dimension and fatigue threshold value in dual-phase steels, Scripta Metallurgica, 1988, 22, 827-832.
  140. D.L.Chen, Z.G.Wang and C.H.Shih, Short fatigue crack and its growth, Materials Science and Engineering (China), 1988, 3, 1-8.
  141. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, The behavior of fatigue crack growth and environmental effect in an as-rolled dual-phase steel, Materials Science Progress, 1988, 2(6), 26-32.
  142. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, The effect of volume fractions of martensite on fatigue crack growth threshold values in dual-phase steels, Materials Science Progress, 1987, 1(4), 53-54.
  143. D.L.Chen, Y.Q.Liu and X.X.Jiang, A study on corrosion behavior of RE-S stainless steels, Corrosion and Protection, 1987, 2, 10-17.
  144. Z.J.Yang, L.T.Wang, D.X.Pang and D.L.Chen, Lattice distortions due to oxygen migration in the Y-Ba-Cu-O system, Physics Letters A, 1987, 126, 58-60.
  145. D.X.Pang, Z.J.Yang, D.L.Chen, L.T.Wang and G.W.Qiao, Phase transitions and superconductivity of the Y1Ba2Cu3O9-x compounds, Materials Letters, 1987, 5, 436-438.
  146. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, Near-threshold corrosion fatigue crack growth in dual-phase steels, Scripta Metallurgica, 1987, 21, 1663-1667.

B. Conference papers
  1. W.Kasprzak, D.L.Chen, E.Thibodeau, Heat treatment development for rapidly solidified heat resistant cast Al-Si alloy, Proceedings of the 26th ASM Heat Treating Society Conference, October 31-November 2, 2011, Cincinnati, Ohio, edited by B.L. Ferguson, R. Jones, D.S. MacKenzie, and D. Weires, ASM International, Materials Park, Ohio, USA, pp. 205-211.
  2. Q.Chang, D.L.Chen, H.Q.Ru, X.Y.Yue, L.Yu, C.P.Zhang, Core-shell structure and mechanical behavior of a new type of iron containing titanium/hydroxyapatite composites, World Journal of Engineering, 2011, Supplement 1, 2011, pp.173-174.
  3. K.Sadayappan, H.A.Patel, D.L.Chen, S.D.Bhole and M. Vassos, Production and characterization of thixomolded magnesium component, 2011 Die Casting Congress & Tabletop, North American Die Casting Association, Columbus, OH, USA, September 19-21, 2011, paper No. T11-082.
  4. S.D.Bhole, C.Ma, M.S.Khan, D.L.Chen, A study of spot welding of advanced high strength steels for automotive applications, the 6th International Conference on High Strength Low Alloy Steels (HSLA Steels’ 2011), Beijing, China, May 31- June 2, 2011 (Invited paper), edited by X.L. He, et al., Chinese Society for Metals, 2011, paper No. w075.
  5. H.Badarinarayan, S.B.Behravesh, S.D.Bhole, D.L.Chen, J.Grantham, M.F.Horstemeyer, H.Jahed, J.B.Jordon, S.Lambert, H.A.Patel, X.Su, and Y.Yang, Monotonic and fatigue behavior of Mg alloy friction stir spot welds: An international benchmark test in the “Magnesium Front End Research and Development” project, Magnesium Technology 2011, Edited by: Wim H. Sillekens, Sean R. Agnew, Neale R. Neelameggham, and Suveen N. Mathaudhu, TMS (The Minerals, Metals & Materials Society), 2011, pp.629-634.
  6. S.M.Chowdhury, D.L.Chen, S.D.Bhole and X.Cao, Effect of pin tool thread orientation on fatigue strength of friction stir welded AZ31B-H24 Mg butt joints, Procedia Engineering, 2010, Vol.2, No.1, pp. 825-833.
  7. N.Farabi, D.L.Chen and Y.Zhou, Fatigue properties of laser welded dual-phase steel joints, Procedia Engineering, 2010, Vol.2, No.1, pp. 835-843.
  8. D.L.Chen, A.R.Emami and A.A.Luo, Cyclic deformation of extruded AM30 magnesium alloy in the transverse direction, Journal of Physics: Conference Series (JPCS), 2010, Vol.240, 012048.
  9. J.Albinmousa, S.Begum, D.L.Chen, Q.Duan, M.F.Horstemeyer, H.Jahed, B.Jordon, S.Lambert, A.Luo, T.Luo, D.Osborne, A.Pascu, X.Su, Y.Yang, L.Zhang and Z.Zhang, Monotonic and fatigue behavior of magnesium extrusion alloy AM30: an international benchmark test in the “Magnesium Front End Research and Development Project”, Advances in Light Weight Materials – Aluminum, Casting Materials, and Magnesium Technologies 2010, doi:10.4271/2010-01-0407, ISSN 0148-7191, Book No. SP-2294, SAE International, April 2010, Paper No. 2010-01-0407.
  10. D.L.Chen, Effect of plastic deformation of artificial wedges on fatigue crack closure, Conference Proceedings (in a CD) of the 12th International Conference on Fracture (ICF12), Ottawa, Canada, edited by M.Elboujdaini, B.Tyson, P.C.Patnaik and R.Bell, 2009, paper No. T12.014.
  11. N.Afrin, D.L.Chen, X.Cao and M.Jahazi, Fatigue properties of friction stir welded AZ31B magnesium alloy, COM 2008 (47th Annual Conference of Metallurgists of CIM) – Aerospace Materials and Manufacturing: Advances in Processing and Repair of Aerospace Materials in honor of Dr. Mahesh Chaturvedi, edited by M. Jahazi, M. Elboujdaini and P. Patnaik, Metallurgical Society of CIM, 2008, pp.377-388.
  12. M.S.Khan, S.D.Bhole, D.L.Chen, G.Boudreau, E.Biro and J.Van Deventer, Resistance spot welding characteristics and mechanical properties of galvannealed HSLA 350 steel, COM 2008 (47th Annual Conference of Metallurgists of CIM) – Recent Developments in Advanced High Strength Steels Processing, edited by P. Wanjara and A.M. Elwazri, Metallurgical Society of CIM, 2008, pp.229-240.
  13. M.S.Khan, S.D.Bhole, D.L.Chen, G.Boudreau, E.Biro and J.Van Deventer, Tempering treatment in resistance spot welding of DP 600 steel, Conference Proceedings (in a CD) of Sheet Metal Welding Conference XIII, Livonia, MI, USA, May 14-16, 2008, 17p.
  14. N.Afrin, D.L.Chen, X.Cao and M.Jahazi, Influence of friction stir welding on the tensile behavior of AZ31B magnesium alloy, COM 2007 (46th Conference of Metallurgists) – Light Metals in Transport Applications, edited by M.O. Pekguleryuz, Metallurgical Society of CIM and TMS, 2007, pp.105-116.
  15. M.Fairman, N.Afrin, D.L.Chen, X.Cao and M.Jahazi, Microstructure and microhardness of  friction stir processed AZ31B-H24 magnesium alloy, COM 2007 (46th Conference of Metallurgists) – Light Metals in Transport Applications, edited by M.O. Pekguleryuz, Metallurgical Society of CIM and TMS, 2007, pp.117-128.
  16. C.Liu, D.L.Chen, S.Bhole, X.Cao and M.Jahazi, Corrosion behavior of the stir zone in a friction stir welded dissimilar joint of 2024 aluminum to AZ31 magnesium alloys, COM 2007 (46th Conference of Metallurgists) – Light Metals in Transport Applications, edited by M.O. Pekguleryuz, Metallurgical Society of CIM and TMS, 2007, pp.129-140.
  17. C.Ma, S.D.Bhole, D.L.Chen, A.Lee, E.Biro and G.Boudreau, Monitoring of spot weld expulsion and its effect on fatigue behavior, Conf. Proc. of the 2nd International Conference of Welding and Joining of Materials (ICWJM 2007), Cusco, Peru, April 16-18, 2007, edited by C. Fosca, E. Indacochea and J. Merzthal, Pontificia Universidad Católica del Perú, Lima, Perú, 12p.
  18. D.L.Chen, Effect of asperity plasticity on the applied stress-COD behavior, Conference Proceedings of the 9th International Fatigue Congress in a CD, edited by W.S. Johnson, D.L. McDowell, J.C. Newman, Jr., and A. Saxena, Elsevier Ltd., Oxford, U.K., 2006, paper No. FT#27 (0107A_05.PDF), 10p.
  19. L.Xiao, D.L.Chen and M.C.Chaturvedi, Dependence of fracture toughness and fatigue crack propagation resistance on boron in Inconel 718 at 650°C, Conference Proceedings of the 9th International Fatigue Congress in a CD, edited by W.S. Johnson, D.L. McDowell, J.C. Newman, Jr., and A. Saxena, Elsevier Ltd., Oxford, U.K., 2006, paper No. FT#64 (0205A_08.PDF), 10p.
  20. D.L.Chen, Fatigue crack closure in consideration of the plastic deformation of asperity, Materials for Safety and Health: Mesoscopic and Multiscale Consideration in Modern Science and Engineering (Proc of the 7th International Conference on Mesomechanics, Montreal, August 1-4, 2005), edited by G.S. Sih and T. Vu-Khanh, pp.380-386.
  21. Q.Zhang and D.L.Chen, Effect of particle size on the low cycle fatigue life of discontinuously reinforced MMCs, Proc of the 2nd International Symposium on Aerospace Materials and Manufacturing: Development Testing & Life Cycle Issues (COM 2004), Hamilton, Ontario, August 2004, edited by P.C. Patnaik, M. Elboujdaïni, M. Jahazi and J. Luo, The Metallurgical Society of CIM, 2004, pp.289-300.
  22. L.Xiao, D.L.Chen and M.C.Chaturvedi, Effect of boron on fatigue crack propagation resistance and low cycle fatigue properties of Inconel 718, Proc. the 10th Inter. Symp. on Superalloys (Superalloys 2004), edited by K. A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra and S. Walston, The Minerals, Metals & Materials Society, Pennsylvania, USA, 2004, pp.275-281.
  23. D.L.Chen and Z.Wang, Modeling of fatigue crack closure effect incorporated with the asperity plasticity, The 9th International Conference on the Mechanical Behavior of Materials, Geneva, Switzerland, May 25-29, 2003, edited by S.R.Bodner, D.Rittel and D.Sherman, paper #66 published in a CD.
  24. D.L.Chen, Modeling of load-COD curves in fatigue crack closure effect, Proc. of the 8th International Fatigue Congress (Fatigue 2002), edited by A.F.Blom, Engineering Materials Advisory Services Ltd., West Midlands, U.K., 2002, Vol.4, pp.2329-2335.
  25. M.C.Chaturvedi and D.L.Chen, Microstructure and fatigue properties of welded 2195 Al-Li alloy, Proc. of the 8th International Fatigue Congress (Fatigue 2002), edited by A.F.Blom, Engineering Materials Advisory Services Ltd., West Midlands, U.K., 2002, Vol.5, pp.3277-3284.
  26. A.Varvani and D.L.Chen, The modified fatigue crack closure concept: further modeling and evaluation, Damage and Fracture Mechanics VII – Computer Aided Assessment and Control, edited by C.A.Brebbia and S.I.Nishida, WIT Press, Southampton, U.K., 2002, pp.205-214.
  27. D.L.Chen, B.Weiss and R.Stickler, Effect of crack tip plasticity on fatigue crack closure, Proc. of the 7th Inter. Fatigue Congress (Fatigue 99), edited by X.R.Wu and Z.G.Wang, Higher Education Press and EMAS, 1999, pp.503-508.
  28. D.L.Chen, M.C.Chaturvedi, N.Goel and N.L.Richards, Near-threshold fatigue crack growth behavior of heat-affected zone in Weldalite 049 Al-Li alloy, Advances in Industrial Materials, edited by D.S.Wilkinson, W.J.Poole and A.Alpas, The Metallurgical Society of CIM, 1998, pp.161-175.
  29. C.Stickler, D.L.Chen, B.Weiss and R.Stickler, Time dependent microplastic deformation of molybdenum and tantalum at low temperatures, Proc. of the 14th International Plansee Seminar, edited by G.Kneringer, P.Roedhammer and P.Wilhartitz, Plansee AG, 1997, Vo1.1, pp.1004-1017.
  30. H.Danninger, B.Weiss, J.Preitfellner, D.L.Chen and D.Spoljaric, Fatigue crack growth in a high strength sintered Mo steel, Proc. of Inter. Conf. on Fractography ’97, edited by L. Parilak, IMR SAS Kosice, Slovakia, 1997, pp.252-258.
  31. D.L.Chen, B.Weiss and R.Stickler, Energy considerations of fatigue crack closure process, Proc. of the 6th International Fatigue Congress (Fatigue ´96), edited by G.Lütjering and H.Nowack, Elservier Science Ltd., Oxford, Vol.I, 1996, pp.357-362.
  32. F.Müller, A.Engels, B.Weiss, D.L.Chen, R.Stickler and C.M.Sonsino, Development of a high-strength cast steel for the design of optimised light-weight hybrid constructions, Proc. of the 6th International Fatigue Congress (Fatigue ´96), edited by G.Lütjering and H.Nowack, Elservier Science Ltd., Oxford, Vol.II, 1996, pp.1195-1200.
  33. D.L.Chen, B.Weiss and R.Stickler, Time dependent microplasticity of recrystallized molybdenum near room temperature, Localised Damage IV (Computer-Aided Assessment and Control), edited by H.Nisitani, M.H.Aliabadi, S.I.Nishida and D.J.Cartwright, Computational Mechanics Publications, Southampton, U.K., 1996, pp.485-492.
  34. D.L.Chen, B.Weiss and R.Stickler, A simple method for the determination of geometric correction factors in linear elastic fracture mechanics, ”Mechanisms and Mechanics of Damage and Failure”, edited by J.Petit, J.de Fouquet, G.Henaff, P.Villechaise and A.Dragon, Engineering Materials Advisory Services Ltd., Warley, U.K., 1996, Vol.1, pp.315-320.
  35. D.L.Chen, B.Weiss and R.Stickler, Time dependence of microplastic deformation of molybdenum at low temperatures, ”Mechanisms and Mechanics of Damage and Failure”, edited by J.Petit, J.de Fouquet, G.Henaff, P.Villechaise and A.Dragon, Engineering Materials Advisory Services Ltd., Warley, U.K., 1996, Vol.2, pp.909-914.
  36. D.Spoljaric, H.Danninger, B.Weiss, D.L.Chen and R.Ratzi, Influence of the testing frequency on the fatigue properties of PM-steels, International Conference on Deformation and Fracture in Structural PM Materials, edited by L.Parilak, H.Danninger, J.Dusza and B.Weiss, IMR-SAS Kosice, 1996, Vol.1, pp.147-158.
  37. M.Fischer, D.L.Chen, B.Weiss and R.Stickler, Time and strain rate dependent plasticity of recrystallized molybdenum near room temperature, Proceedings of the 1st International Conference on Mechanics of Time Dependent Materials (Ljubljana, Slovenia, September 1995), edited by I.Emri and W.G.Knauss, Society for Experimental Mechanics, Inc., Bethel, Connecticut, U.S.A., 1995, pp.108-113.
  38. D.L.Chen, B.Weiss and R.Stickler, A critical experiment on the effective stress intensity range for fatigue crack propagation, Proceedings of EUROMAT 94, edited by B.Vorsatz and E.Szoke, Hungarian Mining and Metallurgical Society and Scientific Society of Mechanical Engineering, 1994, Vol.1, pp.183-187.
  39. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Effective fatigue threshold of a dual-phase steel, Proceedings of EUROMAT 94, edited by B.Vorsatz and E.Szoke, Hungarian Mining and Metallurgical Society and Scientific Society of Mechanical Engineering, 1994, Vol.3, pp.722-726.
  40. D.L.Chen, B.Weiss, R.Stickler, D.Spoljaric and H.Danninger, Fracture toughness testing of PM-materials, Proceedings of PM´94 Powder Metallurgy World Congress, Paris, June 6-9, 1994, Societe Francaise de Metallurgie et de Materiaux and European Powder Metallurgy Association, Les Editions de Physique, Vol.II, pp.843-846.
  41. D.Spoljaric, H.Danninger, D.L.Chen, B.Weiss and R.Stickler, Influence of singular defects on the fatigue properties of low alloyed PM-steels, Proceedings of PM´94 Powder Metallurgy World Congress, Paris, June 6-9, 1994, Societe Francaise de Metallurgie et de Materiaux and European Powder Metallurgy Association, Les Editions de Physique, Vol.II, pp.827-830.
  42. C.H.Liu, D.L.Chen, H.A.Mang, B.Weiss and R.Stickler, Numerical verification of stress distribution ahead of crack tip for finite-width center cracked specimen, Proceedings of Localized Damage III (Computer-Aided Assessment and Control), Udine, Italy, 21-23 June, 1994, edited by M.H.Aliabadi, A.Carpinteri, S.Kalisky and D.J.Cartwright, Computational Mechanics Publications, Southampton, pp.359-366.
  43. B.Weiss, D.L.Chen, R.Stickler, M.Nazmy and C.Noseda, Effect of advanced fine grained technology on the static and cyclic properties of a Ni-base superalloy, Advanced Casting and Solidification Technology, COST-504 Conference held in Espoo, Finland, September 12-13, 1994, edited by H.Kleemola and K.Pithan, published by the European Commission (ISBN 2-87263-120-8), ECSP-EEC-EAEC, Brussels, Belgium, 1994, pp. 425-443.
  44. D.L.Chen, B.Weiss and R.Stickler, Fracture toughness of small specimens containing surface cracks, Structural Integrity: Experiments - Models - Applications, Proceedings of the 10th European Conference on Fracture (ECF 10) held in Berlin, September 20-23, 1994, Vol.1, edited by K-H. Schwalbe and C. Berger, Engineering Materials Advisory Services Ltd., Warley, U.K., 1994, pp.223-233.
  45. B.Weiss, D.L.Chen and R.Stickler, Test procedures and a new concept for near-threshold fatigue closure, Theoretical Concepts and Numerical Analysis of Fatigue, edited by A.F.Blom and C.J.Beevers, Materials and Component Eng. Publications, U.K., 1993, pp.173-199.
  46. D.L.Chen, B.Weiss and R.Stickler, A new concept of closure evaluation for fatigue crack propagation, Proc. of the 5th Inter. Conf. on Fatigue and Fatigue Thresholds (Fatigue 93) held 3-7 May, 1993, Montreal, Canada, Vol.I, edited by J.P.Bailon and J.I.Dickson, Engineering Materials Advisory Services Ltd., Warley, West Midlands, U.K., 1993, pp.555-563.
  47. Z.M.Sun, B.Weiss, D.L.Chen, R.Stickler, Z.G.Wang and J.Bi, Small and long fatigue cracks in SiC particulate reinforced Al-alloys, Proc. of the 5th Inter. Conf. on Fatigue and Fatigue Thresholds (Fatigue 93) held 3-7 May, 1993, Montreal, Canada, Vol.II, edited by J.P.Bailon and J.I.Dickson, Engineering Materials Advisory Services Ltd., Warley, West Midlands, U.K., 1993, pp.1117-1122.
  48. D.L.Chen, B.Weiss, R.Stickler, M.Witwer, G.Leichtfried and H.Hödl, Fracture toughness of high melting point materials, Proceedings of the 13th International Plansee Seminar, Vol.1 (Metallic High Temperature Materials), edited by H.Bildstein and R.Eck, Metallwerk Plansee, Reutte, Austria, 1993, pp.621-631.
  49. D.L.Chen, B.Weiss, R.Stickler, A.Hadrboletz and Z.G.Wang, An introduction to force balance method for the analysis of exact stress intensity factors, Proceedings of Materials Science Symposium, edited by D.L.Chen, P.Yong and X.Y.Li, Chinese Association of Science and Technology in Austria, Vienna, 1993, pp.20-31.
  50. Z.M.Sun, R.Jaekel, D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Influence of measurement location on fatigue crack closure evaluation, Proceedings of Materials Science Symposium, edited by D.L.Chen, P.Yong and X.Y.Li, Chinese Association of Science and Technology in Austria (CASTA), Vienna, 1993, pp.57-62.
  51. D.L.Chen, B.Weiss, R.Stickler, H.Schmidt and Z.G.Wang, An experimental examination on conventional effective driving force of fatigue crack growth, Proceedings of Materials Science Symposium, edited by D.L.Chen, P.Yong and X.Y.Li, Chinese Association of Science and Technology in Austria (CASTA), Vienna, 1993, pp.72-79.
  52. D.L.Chen, B.Weiss, R.Stickler and Z.G.Wang, Fatigue crack propagation behavior and effective fatigue threshold of a dual-phase steel, Proceedings of Materials Science Symposium, edited by D.L.Chen, P.Yong and X.Y.Li, Chinese Association of Science and Technology in Austria (CASTA), Vienna, 1993, pp.80-91.
  53. D.L.Chen, B.Weiss and R.Stickler, New considerations on the fatigue crack "closure effects", European Conference Proceedings (Junior-Euromat´92), Lausanne, Switzerland, August 24-28, 1992, pp.20-21.
  54. D.L.Chen, B.Weiss and R.Stickler, Near-threshold fatigue crack closure - a new concept, Strength of Metals and Alloys (ICSMA 9, Haifa, Israel, July 14-19, 1991), Edited by D.G.Brandon, R.Chaim and A.Rosen, Freund Publishing House, Ltd., London, England, Vol.II, 1991, pp.943-950.
  55. D.L.Chen, B.Weiss and R.Stickler, The application of a new evaluation method for near-threshold closure effects of small surface fatigue cracks, Proceedings of the 10th Congress on Material Testing, Edited by E.Czoboly, Budapest, Hungary, Scientific Society of Mechanical Engineers, 1991, Vol.II, pp.466-471.
  56. J.Becker, G.Fischer, R.Schäfer, D.L.Chen, B.Weiss and R.Stickler, Fatigue and fracture of an advanced PM-aluminum alloy, Advances in Powder Metallurgy-1991, Edited by L.F.Pease III and R.J.Sansoucy, Vol.6 (Aerospace, Refractory and Advanced Materials), Metal Powder Industries Federation and American Powder Metallurgy Institute, Princeton, New Jersey, U.S.A, 1991, pp.59-74.
  57. Z.G.Wang, Z.M.Sun, D.L.Chen and S.H.Ai, Cyclic deformation and fracture behavior in dual-phase steels, C-MRS International 90, Mechanical Properties/Materials Design, edited by B.Wu, Vol.5, Elsevier Science Publishers B.V., Amsterdam, 1991, pp.49-58.
  58. D.L.Chen, Z.G.Wang, X.X.Jiang, C.H.Shih, B.Weiss and R.Stickler, A theoretical analysis of the relationship between fatigue threshold and martensite content in dual-phase steels, Proc. of the 4th Inter. Conf. on Fatigue and Fatigue Thresholds, Honolulu, Hawaii, U.S.A, edited by H.Kitagawa and T.Tanaka, 1990, Vol.III, pp.1393-1400.
  59. Z.G.Wang, D.L.Chen, X.X.Jiang, C.H.Shih, B.Weiss and R.Stickler, The effect of martensite content on the strength and fatigue threshold of dual-phase steels, Proc. of the 4th Inter. Conf. on Fatigue and Fatigue Thresholds, Honolulu, Hawaii, U.S.A, edited by H.Kitagawa and T.Tanaka, 1990, Vol.III, pp.1363-1368.
  60. D.L.Chen, Influence of rare-earth elements and sulphur contents on corrosion behavior of free-cutting stainless steel, Conf. Proc. of National Youth Metallurgical Theory and Technology, Beijing, China, Metallurgical Industry Press, 1989.
  61. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, Influence of martensite content and stress ratio on fatigue threshold in dual-phase steels, Proc. of Inter. Conf. on Basic Mechanisms in Fatigue of Metals, edited by P.Lukas and J.Polak, Elsevier Science Publishers, Amsterdam, The Netherland, 1988, pp.351-359.
  62. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, Corrosion fatigue of dual-phase steels, Proc. of the 4th Inter. Conf. on Hydrogen and Materials, edited by P.Y.Azou and N.P.Chen, Beijing, 1988, pp.398-405.
  63. D.L.Chen, Z.G.Wang, X.X.Jiang, S.H.Ai and C.H.Shih, Near-threshold fatigue crack propagation in dual-phase steels, China-France Bilateral Symposium on Metal Science, Shenyang, China, June 8-11, 1987, and Proc. of the 1st Chinese Youth Symposium on Material Science, Institute of Metal Research, Academia Sinica, Shenyang, China, Oct.16-19, 1987, edited by R.Yang, Vol.II, pp.359-364.
C. Non-refereed conference papers/abstracts: 54
     (Available upon request)

D. Research/technical reports: 58
     (Available upon request)